How Do You Change the Transmission Belt on a John Deere D170?

Step 1: Disconnect the Spark Plug Wire
Disconnect the spark plug wire to ensure the engine will not start while you change the belt.

Step 2: Remove the Transmission Cover
Remove the bolts holding the cover in place. The cover is usually at the base of the tractor, near the front.

Step 3: Locate the Transmission Belt
The belt is the long, flat belt running from the engine to the transmission, usually dark and near the center of the tractor.

Step 4: Remove the Old Transmission Belt
Remove the old belt by hand. A pry bar or other tool may be necessary.

Step 5: Install the New Transmission Belt
Slip the new belt over the pulleys, ensuring it is seated correctly and not twisted or damaged.

Step 6: Reattach the Transmission Cover
Replace the bolts and ensure the cover is secure.

Step 7: Reconnect the Spark Plug Wire
Reconnect the spark plug wire.

Step 8: Test the Tractor
Start the tractor and ensure the transmission is functioning correctly.