To put a transmission belt on a John Deere Z225, follow these steps:
1. Park the Z225 on a level surface and engage the parking brake.
2. Remove the drive cover by removing the bolts securing it to the frame.
3. Remove the old transmission belt by slipping it off the pulleys.
4. Inspect the pulleys for wear or damage and replace them if necessary.
5. Place the new transmission belt around the pulleys, starting with the larger pulley and winding around the smaller one.
6. Make sure the belt is properly seated in the pulley grooves.
7. Reinstall the drive cover and secure it with bolts.
8. Start the Z225 and test the transmission belt by operating the machine and shifting through the gears.
Additional tips: Use the correct size and type of belt, ensure proper tension, and inspect the belt regularly for wear or damage.